JetNet 7714G-M12 HVDC

Industrial 10 FE/8 4GbE, Managed L3 Routing Switch

分享到

Data sheet

 

JetNet 7714G-M12 HVDC Industrial 10 FE/8 4GbE, Managed L3 Routing Switch

  • 10 ports Fast Ethernet M12-D, 4 Gigabit M12-A
  • 8 IEEE 802.3at PSE embedded in Fast Ethernet
  • Non-Blocking, High Speed Network Switching  Fabric
  • EN50155 Railway on-board power system design
  • Network Redundancy – MSR (Multiple Super RingITU-T G.8032 ERPS, RSTP, MSTP, Super Chain
  • Fully Device Management – SNMP v1/v2c/v3, RMON, Web UI, Telnet and Local Console
  • Friendly Device and Network Topology recovery utility – Korenix View, Korenix NMS
  • Advanced Network Security –MAC security, IEEE 802.1x Port Based access control IEEE 802.1x Radius Server authentication, 802.1x MAB, Deny of Service, IP Source Guard, Deny of ARP Inspection
  • Layer 2 Network Performance – IEEE802.1Q VLAN, Private VLAN, Trunk, Traffic Filtering, DHCP Server/Client, Traffic Prioritize, Forwarding Rate Control
  • Layer 3 Network Routing Protocols – Static/Dynamic Route Multicast Routing
  • Hardware Watchdog for -Recovery
  • High Level Electromagnetic interference immunity

 

Product Introduction

The JetNet 7714G-M12 is a Layer-3 routing Switch with 10 ports Fast Ethernet M12-D, 4 ports Gigabit Ethernet M12-A interfaces, and the Fast Ethernet also embedded 8 ports PSE for application. The system supports wide range power input to compliance most of modern train, and secure the passengers’ safety isolated electrical power system design. The system also design with Ingress protect grade 30 to offer anti-dust, water-proof, anti-vibration/shock for the MRT trains. The 8 PSE interface enabled system powering remote IP cameras, low power 3G/LTE/WiFi device through Ethernet cable. With the JetNet 7714G L3 Switch, it can train Ethernet communication system.